How to fit decking lights uk

Step Three - Connect the lights. If you have drilled correctly, your lights should fit into the holes that you have drilled into the decking. Once you have placed the lights in the holes, you can connect the back of each light to the loom socket behind the decking.

Each time you connect the light to the socket you will need to screw a cap on the end so that you can create a waterproof seal. This is important so that your lights are not affected by wet weather. Buy an in-deck lighting kit with the number of lights you require, or buy the lights separately if you need an odd number.

In-deck lights are available from most home improvement retailers. The switch will be connected to the lights via 0. The live power to the switch will be via a fused spur conncected to a socket in the kitchen. For our deck , the post lights (green) highlight the main entrance to the house and light the path to the driveway. The step lights (blue) add safety by lighting stairways.

The rope lights (red) highlight the planter boxes and add ambient light. The floodlights (orange) highlight the plants and add to the look from the street. The Solar Round Decking Light is designed to the very highest of standards and will work reliably year round in the UK in the vast majority of locations. Before making adjustments to your decking , paths or driveways we advise that you test the light for days in your desired location to ensure that your are satisfied with its performance there.

Our LED Deck Lighting Kit is simple and easy to install , with marine grade aluminium face and outdoor waterproof transformer you can have your deck lighting up and. Adding lights to your decking can be an impactful decorative touch. Highlight the edge of steps for increased safety at night, or create a cosy area of your garden.

From vibrant colour changing deck lights to daylight white LEDs and cool blue deck lights , we have a range of bulb colours to help you find the best fit for your outdoor space. If you’re installing decking lights for the first time, our pack of deck lights is the perfect amount to edge stairways or line your driveway. To give you an idea, the main frame for the 4. This took linear metres of wood to build.

We had to use 175mm x 50mm section timber to take the deck up to the interior floor height of the house. Huge Range Of Decking Lights. They’re available in a range of attractively-designed water-resistant lighting products, and they’re easy to install just about anywhere. Transform the outside of your home with a series of well-placed deck ground lights.

Suitable for decked areas, steps, paths and patios they will add instant appeal to. If your deck width is wider or thinner than a multiple of your decking board width, you will either need to stagger the boards, or cut your end boards length-ways so they fit into the surface decking. Staggering the boards involves leaving a larger gap than you might normally, though this is risky as your boards may shrink and leave big gaps in the surface.

The last thing you want is heels or. How to lay decking Building garden decking is an ideal way to extend your outdoor living space and with a great range of decking timber and designs to choose from at Homebase , it’s easy to create your dream deck. Deck lighting is a great way to make your deck more attractive and useful. Follow our step-by-step instructions to learn how to install low-voltage lights.

Deck and ground lights are a modern and attractive way to give your garden a 21st century look. They are a cool way to add value and style to outside decking areas. This type of lighting solution is a very effective extra safety feat.

How to build decking Print Page Summary: Learn how to do decking , lay decking , treat the timber, lay a base, construct the decking , construct raised decking , install posts, fix the frame, fix the boards, erect a balustrade and steps, assemble the steps, construct a stringer and fix the steps. When it comes to garden lighting , a low-voltage set-up is the simplest and safest to install. Often the light units are on spikes, which you just push into the ground.

The lights take their power from the transformer via ordinary two-core cable.